How to add water to your vehicle: a comprehensive guide and recent hot topics
Recently, as the hot weather in summer continues, the topic of vehicle maintenance has once again become a hot topic on the Internet. According to big data statistics, the search volume for keywords such as "misunderstandings in vehicle maintenance" and "notes on filling water tanks" increased by 120% compared with the previous month. This article will combine the hot topics of the past 10 days to systematically explain the correct method of adding water to vehicles, and attach structured data for reference.
1. Recent hot topics in vehicle maintenance (2023 data)
| Ranking | hot topics | Number of discussions (10,000) | Related knowledge points |
|---|---|---|---|
| 1 | Vehicle spontaneous combustion in hot weather | 285.6 | Cooling system maintenance |
| 2 | New energy vehicle coolant replacement | 178.2 | Battery Thermal Management |
| 3 | Misunderstandings about traditional water tank maintenance | 156.9 | Antifreeze selection |
2. Standard process for adding water to vehicles
1.Preparation: Make sure the engine is completely cool (at least 30 minutes after parking), prepare distilled water or special coolant, and wear protective gloves.
2.Water tank positioning: Open the engine compartment cover. Usually the water tank is located on the left side of the engine. There is a translucent fluid reservoir with the "Coolant" logo.
| Vehicle type | Water tank location characteristics | Recommended water level |
|---|---|---|
| car | left side of engine | Between MAX-MIN lines |
| SUV | behind front grille | 3cm from top |
| New energy vehicles | Near the battery pack | Electronic ruler detection |
3.Add water operation: Pour the coolant slowly to the standard line to avoid bubbles. If using concentrated liquid, it needs to be mixed with water according to the ratio recommended by the manufacturer (usually 1:1).
3. Answers to recent hot questions
Regarding the common mistakes in the #VehicleWaterAddChallenge on the Douyin platform, special reminder:
•Myth 1: Add tap water directly. Minerals in tap water will form scale and affect heat dissipation efficiency. Distilled water or special coolant should be used.
•Myth 2: Mix coolants of different colors. A recent actual measurement by an automotive blogger showed that mixing can lead to chemical precipitation and a 37% drop in cooling efficiency.
| Coolant type | Applicable temperature | Replacement cycle |
|---|---|---|
| Ethylene glycol group (green) | -35℃~120℃ | 2 years/40,000 kilometers |
| Organic acid type (red) | -45℃~150℃ | 5 years/100,000 kilometers |
4. Special scene processing
Based on the Weibo trending search #Heavy Rain Vehicle Wading Incident, special reminder:
1.Check after wading: If water enters the water tank, it must be drained immediately and replaced with new coolant to avoid corrosion inside the engine.
2.emergency hydration: When there is no coolant, pure water can be used temporarily, but the regular coolant needs to be completely replaced afterwards.
5. New Trends in Intelligent Vehicles
According to the summer test report of Dongchedi:
• 87% of 2023 new energy vehicles are equipped with intelligent cooling systems that can realize automatic liquid level detection and remote alarm.
• It is recommended to install a liquid level sensor on traditional models (recent Taobao data shows that sales of related products increased by 65% monthly).
Proper water tank maintenance can not only prevent engine overheating, but also improve fuel economy by 10%-15%. It is recommended to check the cooling system every quarter and perform professional maintenance in conjunction with the vehicle maintenance cycle.
check the details
check the details
en
