Small Frog Li-ion Battery 24V 5ah for E-Bike/Motorcycle Battery
Shenzhen Eastar Battery Co., Ltd.- Type:Lithium Ion Battery
- Rated Capacity:5
- Working Life:5
- Certification:CE
- Color:Black
- Application:Motorcycle,E-Bike
Base Info
- Model NO.:GLM5Ah-7268124
- Keywords:Lithium Battery for Motorcycle,E-Bike
- BMS:Yes
- Transport Package:Carton
- Specification:90*150*255mm
- Trademark:EASTAR
- Origin:China
- HS Code:85072000
- Production Capacity:80, 0000 PCS,Month
Description
Cell
model
GLM5Ah-7268124
Capacity(0.5C)
≥5Ah
rated voltage(V)
3.7V
Typical Impedance (mΩ)
≤12mΩ
Battery material
NMC cathode material
PACK
Combination method
2P7S
Minimal capacity(0.5C)
10Ah
Nominal voltage
24V
Max. charge voltage
29.4V
Discharge cut-off voltage
≤21V
Max Charge current
5A
Max Working current
15A
Standard charge current
0.2C
Standard charge current
0.5C
Pack Impedance standard
≤100mΩ
Weight (Approx.)
2.5Kg
Max. dimension(L×W×H)(mm)
90*150*255
Operating temperature
Charge temperature
0ºC~45ºC
Discharge temperature
-10ºC~55ºC
BMS
Single cell over-charge cut-off voltage
4.2V
over-charge release voltage
4.1V
Single cell under-discharge cut-off voltage
2.75V
Discharge release voltage
3.0V
Over-discharge cut-off current
52A
Over-discharge cut-off current delay
1.5S
Short-circuit protection
150A
Short-circuit protection delay
500uS
Condition for the recovery of over-current and Short-circuit
Balance current
40-50mA
Balance Condition
4.175
Caution:
1.Do not dismantle, open or shred the batteries.
2.Do not expose batteries to heat or fire. Avoid storage in direct sun light.
3 .Do not short-circuit the battery,Do not store batteries haphazardly in a box or drawer where they may be short-circuited by other metal objects.
4 Forbid confusedly using the charge socket and discharge socket, or accidents may occurred.
5.Do not subject batteries to mechanical shock.
6.In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
7.Observe the plus (+) and minus (-) marks on the battery and equipment and ensure correct use.
8.Keep batteries out of the reach of children.
9.Keep batteries clean and dry.
10.Wipe the battery terminal s with a clean dry cloth if they become dirty.
11 .Batteries need to be charged before use. Always use the correct charger and refer to the manufacturer's instructions or equipment manual for proper charging instructions.
12.Do not leave a battery on prolonged charge when not in use.
13 .After extended periods of storage, it is necessary to charge and discharge the batteries several times to obtain maximum performance.
14 .The batteries give their best performance when they are operated at normal room temperature (20 °C ± 5 °C).
15.Retain the original product literature for future reference.
16.Use only the battery in the application for which it was intended.
17 When possible, remove the battery from the equipment when not in use.
18. Dispose of properly.
19. Cells used as E-motor or storage power should be matched with controller or related equipment..Because the battery piles are matched with protection board,you can not drive the pure inductance equipment otherwise you could damage the whole system.